4–40
Maintenance and Service Guide
Removal and replacement procedures
c. Remove the display panel from the display enclosure.
d. Remove the six Phillips PM2.0×3.0 screws
1
that secure the display hinges to the display panel.
e. Remove the display hinges
2
from the display panel. The display hinges are available using spare part
number 535871-001.
5. If it is necessary to replace the webcam module cable, release the webcam module cable
1
from the clips and
routing channels
2
built into the display enclosure, and then remove the cable
3
. The webcam module cable is
included in the Display Cable Kit, spare part number 536430-001.
Reverse this procedure to reassemble and install the display assembly.
