manualshive.com logo in svg

HP 339674-001, User Manual

Share
Download
HP 339674-001 User Manual Download Page 89

HP CONFIDENTIAL

 

File Name: 339674-1.doc   Last Saved On: 8/14/03 3:54 PM

 

 

 Regulatory 

Compliance 

Notices 

89 

 

 

European Union Notice 

 

Products bearing the CE marking comply with the EMC Directive (89/336/EEC) 
and the Low Voltage Directive (73/23/EEC) issued by the Commission of the 
European Community and, if this product has telecommunication functionality, 
the R&TTE Directive (1999/5/EC). 

Compliance with these directives implies conformity to the following European 
Norms (in parentheses are the equivalent international standards and regulations): 

• 

EN 55022 (CISPR 22)—Electromagnetic Interference  

• 

EN55024 (IEC61000-4-2, 3, 4, 5, 6, 8, 11)—Electromagnetic Immunity 

• 

EN61000-3-2 (IEC61000-3-2)—Power Line Harmonics 

• 

EN61000-3-3 (IEC61000-3-3)—Power Line Flicker 

• 

EN 60950 (IEC60950)—Product Safety 

 

Japanese Notice 

 

 

Summary of Contents for 339674-001
































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands