HP 3105m Maintenance And Service Manual Download Page 18

Page: 18 / 104

Left-side components

Component

Description

(1)

Power connector

Connects an AC adapter

(2)

Security cable slot

Attaches an optional security cable to the computer

NOTE:

The security cable is designed to act as a

deterrent, but it may not prevent the computer from
being mishandled or stolen.

(3)

Vent

Enables airflow to cool internal components

NOTE:

The computer fan starts up automatically to

cool internal components and prevent overheating. It
is normal for the internal fan to cycle on and off
during routine operation.

(4)

Hard drive light

●

Blinking white: The hard drive is being
accessed.

●

Amber: HP ProtectSmart Hard Drive Protection
has temporarily parked the hard drive.

NOTE:

For information on HP ProtectSmart Hard

Drive Protection, refer to the HP Notebook
Reference Guide.

(5)

Power light

●

Solid white: The computer is on.

●

Blinking white: The computer is in the Sleep
state.

●

Off: The computer is off or in Hibernation.

(6)

HDMI port

Connects an optional video or audio device, such as
a high-definition television, or any compatible digital
or audio component

(7)

USB port

Connects an optional USB device

Chapter 2 External component identification

ENWW

Summary of Contents for 3105m









































































































Search results

Summary of Contents for 3105m

Reviews:

Related manuals for 3105m

Brands by name

Popular brands

HP 3105m, Maintenance And Service Manual

Search results

Summary of Contents for 3105m

Reviews:

Related manuals for 3105m

Brands by name

Popular brands