25
Release Notes for the Cisco Catalyst Blade Switch 3020 for HP, Cisco IOS Release 12.2(55)SE and Later
OL-22861-04
Documentation Updates
Updates to the System Message Guide
New System Messages
Error Message
AUTHMGR-5-SECURITY_VIOLATION: Security violation on the interface
[chars], new MAC address ([enet) is seen. AuditSessionID [chars]
Explanation
A host on the interface attempted to gain access to the network or attempted an
authentication. The interface mode does not support the number of hosts that are attached to the
interface. This is a security violation, and the interface has been error-disabled. The first [chars] is
the interface, [enet] is the Ethernet address of the host, and the second [chars] is the session ID.
Recommended Action
Make sure that the interface is configured to support the number of hosts that
are attached to it. Enter the
shutdown
interface configuration command followed by
no shutdown
interface configuration command to restart the interface.
Error Message
AUTHMGR-5-VLANASSIGN: VLAN [dec] assigned to Interface [chars]
AuditSessionID [chars]
Explanation
A VLAN was assigned. [dec] is the VLAN ID, the first [chars] is the interface, and the
second [chars] is the session ID.
Recommended Action
No action is required.
Error Message
AUTHMGR-7-FAILOVER: Failing over from [chars] for client ([chars]) on
Interface [chars] AuditSessionID [chars]
Explanation
The authorization manager is failing over from the current authentication method to
another method. The first [chars] is the current authentication method, the second [chars] is the
client ID, the third [chars] is the interface, and the fourth [chars] is the session ID.
Recommended Action
No action is required.
Step 9
show ipv6 rip
[
name
] [
database
] [
next-hops
]
or
show
ipv6 route rip
[
updated
]
Display information about IPv6 RIP processes.
Display the contents of the IPv6 routing table.
Step 10
copy running-config startup-config
(Optional) Save your entries in the configuration file.
Command
Purpose
