HP 2730p - EliteBook - Core 2 Duo 1.86 GHz Maintenance And Service Manual Download Page 69

Page: 69 / 126

Removal and replacement procedures

Maintenance and Service Guide

4–29

CAUTION:

The display assembly will be unsupported when the following screws are removed. To prevent damage to the

display assembly, support it before removing the screws.

8. Remove the four Phillips PM2.5×6.0 screws

that secure the display assembly to the computer. Be sure to

hold the display before removing the last screw to prevent damage to the display.

9. Lift the display assembly

straight up and remove it.

Reverse this procedure to install the display assembly.

Summary of Contents for 2730p - EliteBook - Core 2 Duo 1.86 GHz































































































































Search results

Summary of Contents for 2730p - EliteBook - Core 2 Duo 1.86 GHz

Reviews:

Related manuals for 2730p - EliteBook - Core 2 Duo 1.86 GHz

Brands by name

Popular brands

HP 2730p - EliteBook - Core 2 Duo 1.86 GHz, Maintenance And Service Manual

Search results

Summary of Contents for 2730p - EliteBook - Core 2 Duo 1.86 GHz

Reviews:

Related manuals for 2730p - EliteBook - Core 2 Duo 1.86 GHz

Brands by name

Popular brands