HP 2730p - EliteBook - Core 2 Duo 1.86 GHz Maintenance And Service Manual Download Page 54

Page: 54 / 126

4–14

Maintenance and Service Guide

Removal and replacement procedures

Remove the WLAN module:

1. Disconnect the WLAN antenna cables

from the terminals on the WLAN module.

✎

The black WLAN antenna cable is connected to the WLAN module “Main” terminal. The white WLAN antenna
cable is connected to the WLAN module “Aux” terminal.

2. Remove the two Phillips PM2.5×4.0 screws

that secure the WLAN module to the computer. (The edge of the

module opposite the slot rises away from the computer.)

3. Remove the WLAN module

by pulling the module away from the slot at an angle.

✎

WLAN modules are designed with a notch

to prevent incorrect insertion into the WLAN module slot.

Reverse this procedure to install the WLAN module.

Summary of Contents for 2730p - EliteBook - Core 2 Duo 1.86 GHz































































































































Search results

Summary of Contents for 2730p - EliteBook - Core 2 Duo 1.86 GHz

Reviews:

Related manuals for 2730p - EliteBook - Core 2 Duo 1.86 GHz

Brands by name

Popular brands

HP 2730p - EliteBook - Core 2 Duo 1.86 GHz, Maintenance And Service Manual

Search results

Summary of Contents for 2730p - EliteBook - Core 2 Duo 1.86 GHz

Reviews:

Related manuals for 2730p - EliteBook - Core 2 Duo 1.86 GHz

Brands by name

Popular brands