HP 250 G3 Maintenance And Service Manual Download Page 94

Page: 94 / 148

Display assembly

This section describes removing the display assembly in its entirety and disassembling all the display

subcomponents.
If you only need to remove the display bezel, webcam/microphone module, or display panel, you do not need

to remove the entire display assembly from the computer. See

Display subcomponents (bezel, webcam,

panel) on page 50

for more information about removing the display subcomponents that do not require that

you remove the entire display assembly from the computer.

Description

Spare part number

Display assembly (39.6-cm [15.6-in] HD, anti-glare, touchscreen, for use in black HP 15 models

747121-001

Raw display panel, non-touch screen, for use in HP 15 and Compaq 15 models

750635-001

Antennas for use in HP 15 and Compaq 15 models (includes wireless antenna cables and transceivers)

749638-001

Antennas for use in models with a touch screen (includes wireless antenna cables and transceivers)

774163-001

Display bezel for use in HP 15 models

749644-001

Display bezel for use in Compaq 15 models

749645-001

Display cable for use in non-touch screen models (includes display panel cable and webcam/microphone

cable)

749646-001

Display cable for use in touch screen models (includes display panel cable and webcam/microphone cable)

764888-001

Display enclosure for use in black HP 15 models

749641-001

Display enclosure for use in black touch screen models (all models)

774164-001

Display enclosure for use in sparkling black HP 15 models

761695-001

Display enclosure for use in sparkling black HP 15 touch screen models

775086-001

Display enclosure for use in purple HP 15 models

775089-001

Display enclosure for use in gray Compaq 15 models

749642-001

Display enclosure for use in black Compaq 15 models

760962-001

Display enclosure for use in gray HP 15 models

760963-001

Display enclosure for use in red HP 15 models

760964-001

Display enclosure for use in red HP 15 touch screen models

775082-001

Display enclosure for use in white HP 15 models

760965-001

Display enclosure for use in white touch screen HP 15 models

775083-001

Display enclosure for use in blue HP 15 models

760966-001

Display enclosure for use in blue HP 15 touch screen models

775084-001

Display enclosure for use in silver HP 15 models

760967-001

Display enclosure for use in silver HP 15 touch screen models

775085-001

Hinges for use in models without a touch screen (left and right)

749655-001

Hinges for use in models with a touch screen (left and right)

774166-001

Webcam/microphone module

749654-001

Chapter 4 Removal and replacement procedures

Summary of Contents for 250 G3





















































































































































Search results

Summary of Contents for 250 G3

Reviews:

Related manuals for 250 G3

Brands by name

Popular brands

HP 250 G3, Maintenance And Service Manual

Search results

Summary of Contents for 250 G3

Reviews:

Related manuals for 250 G3

Brands by name

Popular brands