manualshive.com logo in svg

HP 250 G3, Maintenance And Service Manual

Share
Download
HP 250 G3 Maintenance And Service Manual Download Page 58

Display subcomponents (bezel, webcam, panel)

This section describes removing display subcomponents that do not require that you remove the entire

display assembly from the computer. You can remove the display bezel, webcam/microphone module, and

display panel while the display assembly is still attached to the computer.
To remove the remaining display subcomponents, you must remove the entire display assembly from the

computer. See 

Display assembly on page 86

 for more information about removing the display assembly in

its entirety.

Description

Spare part number

Raw display panel, non-touch screen, for use in HP 15 and Compaq 15 models

750635-001

Raw display panel for use in Compaq 15 touch screen models

764876-001

Raw display panel for use in HP 15 touch screen models

764877-001

Raw display panel, touch screen, includes bezel, for use in HP 255 G3 models

774167-001

Raw display panel, touch screen, includes bezel, for use in HP 250 G3 models

774165-001

Display bezel for use with HP models

749644-001

Display bezel for use with Compaq models

749645-001

Webcam/microphone module

749654-001

Before removing display subcomponents while the display assembly is still attached to the computer, follow

these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

4.

Remove the battery (see 

Battery on page 49

).

To remove the display bezel, webcam/microphone module, and raw display panel:

1.

Position the computer upright with the front toward you, and then open it.

2.

Flex the inside of the top edge 

(1)

, the left and right sides 

(2)

, and the bottom edge 

(3)

 of the display

bezel until the bezel disengages from the display enclosure.

50

Chapter 4   Removal and replacement procedures

Summary of Contents for 250 G3





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands