HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive Installation Manual Download Page 15

Page: 15 / 123

HP StorageWorks 1000 Modular Smart Array installation guide

Step 1: Review and confirm your plans

Before installing the MSA, HP recommends thorough research and study to develop the best

installation and configuration plan for your environment. Proper planning ensures a successful

installation.

•

Determine which version of MSA controller firmware to use

•

Complete the planning worksheet on the poster

•

Go to the Internet for the most recent MSA and SAN information

•

Review MSA installation best practices

•

Plan your storage configuration

Determine which version of MSA controller firmware to use

Multiple versions of MSA controller firmware are available; these versions use different processing

methods, support different operating systems, and have different hardware compatibility

requirements.
When determining which MSA controller firmware version (and associated Support Software CD) to

use, review the requirements and information in the compatibility guide documents, release notes,

and other MSA announcements.
The following environmental variables affect your decision:

•

Variety of operating systems in the SAN

•

Variety of storage devices in the SAN

•

Number of controllers in this MSA (single or dual)

•

Failover software tool to use (dual-control configurations)

Summary of Contents for 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive




























































































































Search results

Summary of Contents for 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive

Reviews:

Related manuals for 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive

Brands by name

Popular brands

HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive, Installation Manual

Search results

Summary of Contents for 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive

Reviews:

Related manuals for 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive

Brands by name

Popular brands