HP 15-w200-15-w299 Maintenance And Service Manual Download Page 76

Page: 76 / 96

Downloading HP PC Hardware Diagnostics (UEFI) to a USB device

There are two options to download HP PC Hardware Diagnostics to a USB device:

Download the latest UEFI version:

Go to

http://www.hp.com/go/techcenter/pcdiags

. The HP PC Diagnostics home page is displayed.

In the HP PC Hardware Diagnostics section, click the Download link, and then select Run.

Download any version of UEFI for a specific product:

Go to

http://www.hp.com/support

, and then select your country. The HP Support page is displayed.

Click Drivers & Downloads.

In the text box, enter the product name, and then click Go.

– or –

Click Find Now to let HP automatically detect your product.

Select your computer, and then select your operating system.

In the Diagnostic section, follow the on-screen instructions to select and download the UEFI version
you want.

Chapter 8 Using HP PC Hardware Diagnostics (UEFI)

Summary of Contents for 15-w200-15-w299

































































































Search results

Summary of Contents for 15-w200-15-w299

Reviews:

Related manuals for 15-w200-15-w299

Brands by name

Popular brands

HP 15-w200-15-w299, Maintenance And Service Manual

Search results

Summary of Contents for 15-w200-15-w299

Reviews:

Related manuals for 15-w200-15-w299

Brands by name

Popular brands