HP 15-bw0 Series Maintenance And Service Manual Download

Page: 98 / 116

Removing the HP Recovery partition (select products only)

HP Recovery Manager software allows you to remove the HP Recovery partition to free up hard drive space.

IMPORTANT:

After you remove the HP Recovery partition, you will not be able to perform System Recovery

or create HP Recovery media from the HP Recovery partition. So before you remove the Recovery partition,
create HP Recovery media; see

Creating HP Recovery media (select products only) on page 85

NOTE:

The Remove Recovery Partition option is only available on products that support this function.

Follow these steps to remove the HP Recovery partition:

Type

recovery

in the taskbar search box, and then select HP Recovery Manager.

Select Remove Recovery Partition, and then follow the on-screen instructions.

Chapter 8 Backing up, restoring, and recovering

Summary of Contents for 15-bw0 Series





















































































































Search results

Summary of Contents for 15-bw0 Series

Reviews:

Related manuals for 15-bw0 Series

Brands by name

Popular brands

HP 15-bw0 Series, Maintenance And Service Manual

Search results

Summary of Contents for 15-bw0 Series

Reviews:

Related manuals for 15-bw0 Series

Brands by name

Popular brands