manualshive.com logo in svg

HP 15-af131dx, Service Manual, Page: 7 / 128

Share
Download
HP 15-af131dx Service Manual Download Page 7

Creating recovery media to recover the original system .................................................................. 81

What you need to know ..................................................................................................  81

Creating the recovery media ........................................................................  82

Creating system restore points ......................................................................................................... 82

What you need to know ..................................................................................................  82
Creating a system restore point .....................................................................................  82

Backing up system and personal information .................................................................................. 82

Tips for a successful backup ........................................................................................... 83
What you need to know ..................................................................................................  83
Creating a backup using Windows Backup and Restore ................................................. 83

Restore and recovery ........................................................................................................................................... 84

Restoring to a previous system restore point ..................................................................................  84
Restoring specific files ......................................................................................................................  84

Restoring specific files using Windows Backup and Restore .........................................  84

Recovering the original system using HP Recovery Manager ..........................................................  84

What you need to know ..................................................................................................  84
Recovering using HP Recovery partition (select models only) ......................................  85
Recovering using the recovery media ............................................................................  85

Changing the computer boot order .............................................................. 85

11  Backing up, restoring, and recovering in Windows 8.1 ................................................................................... 87

Creating recovery media and backups ................................................................................................................  87

Creating HP Recovery media (select models only) ...........................................................................  87

Using Windows tools ...........................................................................................................................................  88
Restore and recovery ........................................................................................................................................... 88

Recovering using HP Recovery Manager ........................................................................................... 89

What you need to know before you get started ............................................................. 89
Using the HP Recovery partition (select models only) ................................................... 90
Using HP Recovery media to recover .............................................................................. 90
Changing the computer boot order ................................................................................  90
Removing the HP Recovery partition (select models only) ............................................ 91

12  Backing up, restoring, and recovering in Windows 10 .................................................................................... 93

Creating recovery media and backups ................................................................................................................  93

Creating HP Recovery media (select products only) ......................................................................... 93

Using Windows tools ...........................................................................................................................................  94
Restore and recovery ........................................................................................................................................... 95

Recovering using HP Recovery Manager ........................................................................................... 95

What you need to know before you get started ............................................................. 95
Using the HP Recovery partition (select products only) ................................................. 96
Using HP Recovery media to recover .............................................................................. 96

vii

Summary of Contents for 15-af131dx

































































































































Reviews:

No comments