HP 14bt-cb000, Maintenance And Service Manual

Page: 34 / 55

Before removing the speakers, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 23 ).
2. Remove the bottom cover (see Bottom cover on page 23 ).
3. Remove the battery (see Battery on page 24 ).
Remove the speakers:
1. Disconnect the speaker cable from the system board (1).
2. Remove the speaker cable from the clips along the bottom of the battery (2).
3. Remove the speakers from the computer (3).
NOTE: Make sure the rubber gaskets are installed in the mounting holes in the speakers (4) before
installation.
Reverse this procedure to install the speakers.
Touchpad
To remove the touchpad, use this procedure and illustration.
Table 5-5 Touchpad description and part number
Description Spare part number
Touchpad, natural silver M47685-001
Touchpad, pale gold M47686-001
Touchpad, spruce blue M47687-001
Touchpad cable M47676-001
Before removing the touchpad, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 23 ).
2. Remove the bottom cover (see Bottom cover on page 23 ).
3. Remove the battery (see Battery on page 24 ).
28 Chapter 5 Removal and replacement procedures for authorized service provider parts