manualshive.com logo in svg

HP 14-ea000, Maintenance And Service Manual, Page: 48 / 88

Share
Download
HP 14-ea000 Maintenance And Service Manual Download Page 48

34.3 cm (13.5 in) display assembly

To remove and disassemble the display assembly, use these procedures and illustrations.

Table 5-5

  Display assembly descriptions and part numbers

Description

Spare part number

34.3 cm (13.5 in) display assembly:

Antiglare, WLED, touchscreen display assembly with privacy filter in natural silver finish; typical brightness: 
1000 nits

M22161-001

Antiglare, WLED, touchscreen display assembly with privacy filter in nightfall black finish; typical brightness: 
1000 nits

M22160-001

Antiglare, WLED, touchscreen display assembly with privacy filter in Poseidon blue finish; typical brightness: 
1000 nits

M22162-001

BrightView, OLED, touchscreen display assembly in natural silver finish; typical brightness: 400 nits

M22155-001

BrightView, OLED, touchscreen display assembly in nightfall black finish; typical brightness: 400 nits

M22154-001

BrightView, OLED, touchscreen display assembly in Poseidon blue finish; typical brightness: 400 nits

M22156-001

BrightView, WLED, touchscreen display assembly in natural silver finish; typical brightness: 400 nits

M22158-001

BrightView, WLED, touchscreen display assembly in nightfall black finish; typical brightness: 400 nits

M22157-001

BrightView, WLED, touchscreen display assembly in Poseidon blue finish; typical brightness: 400 nits

M22159-001

Before removing the display assembly, follow these steps:

1.

Prepare the computer for disassembly (

Preparation for disassembly on page 37

).

2.

Remove the bottom cover (

Bottom cover on page 37

).

3.

Disconnect the battery cable from the system board (see 

Battery on page 38

).

Remove the display assembly:

1.

Remove the heat sink shield (1).

2.

Disconnect the webcam/microphone module cable (2) from the system board.

3.

Remove the WLAN module shield (3).

4.

Disconnect the wireless antenna cables (4) from the WLAN module.

NOTE:

The #1/Main WLAN antenna cable connects to the WLAN module #1/Main terminal. The #2/Aux 

WLAN antenna cable connects to the WLAN module #2/Aux terminal.

5.

Release the webcam/microphone module cable and the WLAN antenna cables from the retention clip (5) 
built into the top cover.

6.

Disconnect the display panel cable (6) from the system board.

42

Chapter 5   Removal and replacement procedures for authorized service provider parts

ENWW

Summary of Contents for 14-ea000

























































































Reviews:

No comments