HP 11t-f000 Maintenance And Service Manual Download Page 29

Page: 29 / 77

Remove the eleven Phillips PM2.0×5.7 screws (2) that secure the keyboard/top cover to
the base enclosure.

Turn the computer right side up with the front toward you.

Open the computer as far as it will open.

Lift the front edge (1) of the keyboard/top cover until it separates from the front edge of
the base enclosure.

Release the zero insertion force (ZIF) connector (2) to which the power button board cable is attached,
and then disconnect the power button board cable from the system board.

Release the ZIF connector (3) to which the keyboard cable is attached, and then disconnect
the keyboard cable from the system board.

Release the ZIF connector (4) to which the TouchPad board cable is attached, and then disconnect
the TouchPad board cable from the system board.

Component replacement procedures

Summary of Contents for 11t-f000














































































Search results

Summary of Contents for 11t-f000

Reviews:

Related manuals for 11t-f000

Brands by name

Popular brands

HP 11t-f000, Maintenance And Service Manual

Search results

Summary of Contents for 11t-f000

Reviews:

Related manuals for 11t-f000

Brands by name

Popular brands