NOTE:
Before removing the webcam module, note the placement of the rubber gaskets on the
webcam module.
a.
Lift the webcam module (1) enough to gain access to the cable.
b.
Disconnect the cable (2) from the module.
4.
To remove the proximity sensor board:
a.
Disconnect the cable (1) from the display.
b.
Remove the screw (2) that secures the board to the display.
c.
Remove the board (3).
Component replacement procedures
45
Summary of Contents for 11-p100
Page 4: ...iv Safety warning notice ...
Page 7: ...Index 64 vii ...
Page 8: ...viii ...
