22
Data Entry Hints
• Press
to enter the same data twice.
• Press
to repeat the same data item several
times. For example, press 100
15
to
enter the data value 100 15 times.
• You can perform these operations in any sequence,
not necessarily in the same order as in the
example above.
• Press
or
to scroll through the entered data.
• Edit the data displayed as desired. The new data
replace the old data after inputting new data and
pressing the key
. Therefore, if you want to
perform some other operations (calculation,
display calculation result and so on), you must first
press the key
to exit from the data displaying
screen.
• To change a data value, scroll to it, enter the new
value and press
. (However, you must press
if you want to add the value as a new data item.)
• To delete a data value displayed by pressing
and
, press,
.
• The values are stored in the memory. If “Data Full”
appears on the screen, there is no more memory
available to store new data. In this case, press
to display the following menu:
• Press
to quit the data input operation without
storing the entered data values. Alternatively, press
to clear the values but remain in data input mode.
Edit OFF
1
ESC
2
