HP 10811A, Operating & Service Manual

Page: 19 / 73

Model 10811A/B
11
2-34. STORAGE AND SHIPMENT
2-35. Environment
2-36. The 10811A/B may be stored or shipped in environments with the following limits:
Temperature
····························· -55°C to +85°C
Altitude ······································ 15.2 Km (50,000 feet)
2-37. PACKAGING
2-38. Original Packaging
2-39. Containers and materials identical to those used in factory packaging are available through
Hewlett-Packard offices. If the instrument is being returned to Hewlett-Packard for servicing,
attach a tag indicating the type of service required; return address, model number, and full serial
number. Also, mark the container Fragile to ensure careful handling. In any correspondence, refer
to the instrument by model number and full serial number.
2-40. Other Packaging
2-41. The following general instructions should be used for repacking with commercially available
materials.
1. Wrap instrument in heavy paper or plastic. (If shipping to Hewlett-Packard office or service
center, attach tag indicating type of service required; return address, model number, and full
serial number.)
2. Use strong shipping container. A double-wall carton made of 350-pound test material is
adequate.
3. Use a layer of shock-absorbing material 70 to 100 mm (3 to 4 inch) thick around all sides of the
instrument to provide firm cushioning and prevent movement inside container. Protect control
panel with cardboard.
4. Seal shipping container securely.
5. Mark shipping container FRAGILE to insure careful handling.
6. In any correspondence, refer to instrument by model number and full serial number.