217
Step Command
Remarks
2.
Enable the global password
control feature.
password-control
enable
•
In non-FIPS mode, the
global password control
feature is disabled by
default.
•
In FIPS mode, the global
password control feature is
enabled, and cannot be
disabled by default.
3.
(Optional.) Enable a specific
password control feature.
password-control
{
aging
|
composition
|
history
|
length
}
enable
By default, all four password
control features are enabled.
Setting global password control parameters
The password expiration time, minimum password length, and password composition policy can be
configured in system view, user group view, or local user view. The password settings with a smaller
application scope have higher priority. Global settings in system view apply to the passwords of the
local users in all user groups if you do not configure password policies for these users in both local
user view and user group view.
The
password-control login-attempt
command takes effect immediately and can affect the users
already in the password control blacklist. Other password control configurations do not take effect on
users that have been logged in or passwords that have been configured.
To set global password control parameters:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Set the password expiration
time.
password-control aging
aging-time
The default setting is 90 days.
3.
Set the minimum password
update interval.
password-control update
interval
interval
The default setting is 24 hours.
4.
Set the minimum password
length.
password-control length
length
•
In non-FIPS mode, the
default setting is 10
characters.
•
In FIPS mode, the default
length is 15 characters.
5.
Configure the password
composition policy.
password-control composition
type-number
type-number
[
type-length
type-length
]
The following default settings
apply:
•
In non-FIPS mode, a
password must contain a
minimum of one character
type and a minimum of one
character for each type.
•
In FIPS mode, a password
must contain a minimum of
four character types and a
minimum of one character
for each type.
6.
Configure the password
complexity checking policy.
password-control complexity
{
same-character
|
user-name
}
check
By default, the system does not
perform password complexity
checking.
Summary of Contents for 10500 series
Page 326: ...312 No duration limit for this SA ...
