HP 1032 Manual Download Page 66

Page: 66 / 173

Using the CLI

Software can also be removed from Compute Nodes using the /opt/clusterpack/bin/clsh tool to

run the swremove command:

To remove product PROD1 on all Compute Nodes

% /opt/clusterpack/bin/clsh /usr/sbin/swremove PROD1

To install product PROD1 on just the Compute Node group "cae"

% /opt/clusterpack/bin/clsh -C cae /usr/sbin/remove
PROD1

Using the HPSIM GUI

To remove software to Compute Nodes using HPSIM GUI, do the following:

Select "Deploy", "Software Distributor", and then click on "Remove

Software".

Select the node(s) and/or node group to install on.

This will bring up the swinstall GUI, from which you can specify the software
source and select the software to be installed.

References:

3.9.4 How to run HPSIM Web-based GUI

Using the SCM GUI

To remove software to Compute Nodes using SCM GUI, do the following:

Under "Tools", select "Software Management", and then double-click on

"Uninstall Software".

Select the node(s) and/or node group to install on.

This will bring up the swremove GUI, from which you can specify the
software source and select the software to be removed.

References:

3.2.3 How to Run SCM Web-based GUI

1.6.5 Update Software in Compute Nodes

Summary of Contents for 1032







































































































































































Search results

Summary of Contents for 1032

Reviews:

Brands by name

Popular brands

HP 1032, Manual

Search results

Summary of Contents for 1032

Reviews:

Brands by name

Popular brands