Setup and Configuration of a DEMO license
The use of a DEMO license file (license.dat) for Clusterware Pro, as part of the ClusterPack V2.4
Clusterware Edition, requires some modification of installed configuration files.
These modifications will have to be removed in order to use a purchased license key (LSF_license.oem).
1. Place the DEMO license key onto the Management Server
/share/platform/clusterware/conf/license.dat
2. Modify the /share/platform/clusterware/conf/lsf.conf file
{
Comment out the line for "CLUSTERWARE_LICENSE_FILE".
{
Add a line for "LSF_LICENSE_FILE"
LSF_LICENSE_FILE=/share/platform/clusterware/conf/license.d
3. Touch the permanent license file
% touch /share/platform/clusterware/conf/LSF_license.oem
4. Start the Clusterware Services on the Management Sever
% /share/platform/clusterware/lbin/cwmgr start
Note:
These changes will need to be un done in order to use a permanent license key. Please
see /share/platform/clusterware/conf/README.demo for more information.
References:
z
Step 7 Configure the ProCurve Switch
z
2.2.1 Transfer a file from intranet to the Management Server in the cluster
z
3.7.2 How do I obtain and install the Clusterware Pro V5.1 license file?
Back to Top
3.7.3 Where is Clusterware Pro V5.1 installed on the system?
Platform's Clusterware Pro V5.1 is installed on the Management Server and Compute Nodes in the follow
directory:
/share/platform/clusterware
This directory resides on the Management Server and is NFS mounted on all compute nodes.