31
Positioning
Always ensure 60 cm of free space all around the
heater and 45 cm above.
Place the heater on a flat, stable surface.
Protect from high winds by screwing/bolting the
foot (8) securely to a heavy weight or the floor
(screws/bolts not included).
Use
Lighting
Fully open the regulator on the gas bottle.
Press the dial (9) in and turn to
PILOT
. Press the
ignition button (10) until the pilot light ignites.
Ignition can take up to 1 minute if using a new
gas bottle.
Check the pilot light through the hole with sliding
cover to the left or right of the regulator.
ENGLISH
INSTRUCTION MANUAL
Turn the dial to
LO
. The burner will ignite. The
heater can now be adjusted to the heat setting
required by turning the dial to a position between
LO
and
HI
.
Switching off
Turn the dial to
PILOT
to switch off the burner,
but leave the pilot light burning.
Turn the dial to
OFF
to switch of the heater
completely.
Close the gas bottle regulator fully.
Storage
Close the gas bottle regulator fully and remove
from the bottle.
Check for leaks.
Cover the burner (2) with the cover supplied when
not in use.
Store in a safe place. If the heater is to be kept
outdoors, cover with a tarpaulin or similar.
Cleaning
Clean with a soft, damp cloth.
Never use corrosive or inflammable cleaning
agents.
Remove any dirt from the burner.
