3.
Click Next.
On the page as shown in Figure 4, you can perform the following
configurations:
Modify the IP address of VLAN-interface 1. Make sure VLAN-interface 1
and the interface of the hosts or devices that connect to the GE LAN
interface are on the same subnet.
Enable DHCP to assign IP addresses, gateway address, and DNS server
addresses to hosts or devices that connect to the GE LAN interface.
Figure 4 Setting LAN interface parameters
4.
Click Next.
The page that displays basic configuration summary appears.
Figure 5 Complete basic configuration wizard page
Configuring NAT
1.
From the navigation tree, select NAT Configuration > NAT Configuration.
The page for dynamic NAT configuration as shown in Figure 6 appears.
You can set the translation mode to Interface Address, PAT, or No-PAT.
5.
Verify the configuration and click Finish.
3
4
