manualshive.com logo in svg

HP Compaq nw9440 - Mobile Workstation, Maintenance And Service Manual

Share
Download
HP Compaq nw9440 - Mobile Workstation Maintenance And Service Manual Download Page 8

1–2

Maintenance and Service Guide

Product Description

1.1 Features

■

The following processors, varying by computer model:

❏

Intel Core Duo T2600 (2.17-GHz)

❏

Intel Core Duo T2500 (2.00-GHz)

❏

Intel Core Duo T2400 (1.83-GHz)

❏

Intel Core Duo T2300 (1.66-GHz)

■

The following displays are available, varying by 
computer model:

❏

17.0-inch, WUXGA+WVA, TFT (1920 × 1200) with over 
16.8 million colors with AntiGlare

❏

17.0-inch, WSXGA+WVA, TFT (1680 × 1050) with over 
16.8 million colors with AntiGlare

❏

17.0-inch, WXGA+WVA, TFT (1440 × 900) with over 
16.8 million colors with AntiGlare

❏

17.0-inch, WSXGA+WVA, TFT (1680 × 1050) with over 
16.8 million colors with BrightView

■

100-, 80-, and 60-GB high-capacity hard drive, varying by 
computer model

■

256-MB DDR2 synchronous DRAM (SDRAM) at 533 MHz 
and 667 MHz, expandable to 4.0 GB

■

Microsoft® Windows® XP Professional

■

Full-size Windows keyboard with numeric keypad

■

TouchPad and pointing stick pointing devices, including 
a dedicated vertical scroll region (select models only)

■

Integrated 10 Base-T/100 Base-TX Ethernet local area 
network (LAN) network interface card (NIC) with RJ-45 jack

■

Integrated high-speed 56K modem with RJ-11 jack

Summary of Contents for nw9440 - Mobile Workstation











































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands