manualshive.com logo in svg

HP Compaq nw9440 - Mobile Workstation, Maintenance And Service Manual

Share
Download
HP Compaq nw9440 - Mobile Workstation Maintenance And Service Manual Download Page 135

Removal and Replacement Procedures

Maintenance and Service Guide

5–35

5.17 Fan Assembly

1. Prepare the computer for disassembly (

Section 5.3

).

2. Release the keyboard (

Section 5.11

).

3. Disconnect the fan cable 

1

 from the system board.

4. Remove the two Torx8 T8M2.5×7.0 screws 

2

 that secure the 

fan assembly to the base enclosure.

5. Lift the left side of the fan 

3

 until it clears the left side of the 

base enclosure.

6. Slide the fan 

4

 to the left and remove it from the computer.

Removing the Fan Assembly

Reverse the above procedure to install the fan assembly.

Fan Assembly Spare Part Number Information

Fan Assembly

409932-001

Summary of Contents for nw9440 - Mobile Workstation











































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands