Operation
３
３
３
３
Attach the boom A to the set knob A.
There are two holes. Insert the boom A into the
larger hole of
φ
10.
４
４
４
４
Decide the layout.
First, loosen the set knob B. Decide the height, angle
and projection length of boom B. Then secure the set
knob B.
Loosen the set knob A. Decide the angle of the boom
A (camera’s direction). Then secure the set knob A.
３
３
３
３
Thread the boom
A until snug to
secure it surely.
The parts are offset. Insert the boom while push-
ing down the housing as shown in the photo.
Various layouts as these are gotten.
If the insertion hole has been closed
as the photo, turn the housing right
and left while pushing the inner part.
To keep
depth
To select
angle
Always operate the knobs while holding the camera. Otherwise, the camera could fall
down.
Caution
Set knob A
Boom A
Boom B
Set knob B
To keep
height
φ
10
・
If the insertion hole has been closed.
