HOZAN L-462, Instruction Manual

Page: 7 / 8

ESD rubber mat
Table
Clips
Refer to each instruction manual for detailed uses of the microscope, head and
eyepieces.
*
Operation
３
Settle the table on an appropriate place.
Put on the stage. Orient it pressing the spring at the end of
the hole as shown in the photo.
Choose black and white faces of the stage in accordance with
object to be inspected.
Procedures in case of not using the ESD rubber mat
Attach the hook and loop fasteners to the
top of the table and black side of the rub-
ber mat so that they can stick together.
１
Remove the clips.
Then, insert the rubber mat through the
post with the green side up.
３
Hook and loop
fasteners
Table
Clips
Procedures in case of using the ESD rubber mat
The provided rubber mat is a static controlled ESD rubber mat. Use it with
grounding when inspecting electronic components which are sensitive to static
electricity.
２
Settle the table on an appropriate place.
Also the stage should be set on the table.
４
Insert the alligator clip into the insulation
cover for protection of electric shock.
Then, attach the socket of the ground cord
to the stud of the rubber mat behind the
post. Finally, connect the insulated*
alligator clip to the ground.
*Cut the cover to the proper length as
needed.
Grounding