background image

                                                                                     

 

©  2019  Hoymiles  Converter  Technology  Co.,  Ltd.  All  rights  reserved.

                                            2   

 

HM-600NT/HM-700NT/HM-800NT 

About Microinverter 

This  system  is  composed  of  a  group  of  Microinverters  that  convert  direct  current  (DC)  into  alternating 
current  (AC)  and  feeds  it  into  the  public  grid.  The  system  is  designed  for  the  incorporation  of  one 
Microinverter for two photovoltaic modules. Each Microinverter works independently that guarantees the 
maximum power generation of each photovoltaic module. This setup enables user to control the production 
of a single photovoltaic module directly, consequently improving the flexibility and reliability of the system. 
 

About the Manual 

This manual contains important instructions for the HM-600NT/HM-700NT/HM-800NT Microinverter and 
must be read in its entirety before installing or commissioning the equipment. For safety, only qualified 
technician, who has received training or has demonstrated skills can install and maintain this Microinverter 
under the guide of this document. 

 

Other Information 

Product information is subject to change without notice. User manual will be updated frequently, please 
refer to Hoymiles official website at 

www.hoymiles.com

 for the latest version. 

 

 

Summary of Contents for HM-600NT






























Reviews: