© 2019 Hoymiles Converter Technology Co., Ltd. All rights reserved.
8
DTU-W100 3 Gen
Note
：
Please do not install the DTU direct above the metal or concrete to prevent the signal dilution.
(4) Start Procedure
Once the DTU is powered on, the red, green and blue lights will flash every one second in turns for
30 seconds.
(5) WiFi Configuration
Use the smart phone/tablet open the Installer App and login. Approach to “Me” on the bottom of the
page and then “Network Configuration”. And input the house router’s Network name and password,
click “Send to DTU” to complete the WiFi configuration.
4. Site creation on HMP
A. Install Hoymiles Installer APP by searching “Hoymiles” at the App Store (IOS) or Play Store
(Android).
B. Open the APP and login in with your installer account name and password. If you are a new
installer with Hoymiles, please apply an Installer account from Hoymiles Technical and Service
Support Team at
in advance.
C. Add Station, select the “Station” tab on the bottom, then select “
⊕
” on the right top side of the
page.
D. Select “Quick” for Single-DTU and “Profession” for Multi-DTU.
E. Please fill in the station details accordingly, and press “Next” after completed.
F. Press “Add DTU ID”, scan the DTU ID (or you can manually input ID) and press “Next” after
complete.
G. Click “Start binding” and choose the angle and tilt base on the installation.
H. Scan the Microinverter ID (or you can manually input the ID) and click the tick after complete
each ID input. Press “Finish” once all Microinverter ID has been input.
I. Disable the Scan function on the top of the right-hand side and design the Layout base on the
installation. Click the tick box on the top of the right-hand side, and then select “Next” after complete
the design.
J. Upload a picture of the site and select “Finish” to complete the site creation.
K. The new site will appear on the Station list from the Installer account.
L. Please click the “Networking” button after the power station is created.
M. Please wait about 30 minutes, the station will show online, and all the MI-IDs are found.
Summary of Contents for DTU-W100 3rd Gen
Page 1: ...Version 2 0 April 2020...