Hoymiles DTU-G100 User Manual Download Page 4

 

                                                  © 2019 Hoymiles Converter Technology Co., Ltd. All rights reserved.

                                                         

4

 

 

 

DTU-G100 3 Gen 

1.5   Other Information 

       

Product information is subject to change without notice. The user manual will be updated frequently, and 
please refer to Hoymiles official website at www.hoymiles.com for the latest version.   
 

2. About Hoymiles Microinverter System 

 

2.1 The Microinverter 

 

It converts the DC output of solar modules into grid-compliant AC power. It sends the output information 
of PV panels and the operation data of the microinverters to the DTU, which is the hardware basis of the 
panel-level monitoring.     

 

With conversion efficiency up to 96.7% and MPPT efficiency up to 99.9%, Hoymiles microinverters rank 
into the first class of the world

s Microinverter industry. 

 

2.2 The DTU 

 

       

The  DTU  is  the  key  component  in  Hoymiles  microinverter  system.  It  works  as  the  communication 
gateway, which operates between the Hoymiles microinverters and the Hoymiles Monitoring Server. The 
DTU communicates with the microinverter wirelessly via 2.4GHz Proprietary RF (Nordic), collecting the 
operation data of the system. Meanwhile, the DTU connects to the Internet via router and communicates 
with Hoymiles Monitoring Server. The microinverter system operation data will be uploaded to Hoymiles 
Monitoring Server via DTU. 

 

2.3 The Hoymiles Monitoring Server 

 

It collects the operation data and status of the microinverters in the system and provides the panel-level 
monitoring  for  the  users  and  maintenance  staff.  The  following  diagram  shows  the  Hoymiles 
Microinverter system. 

 

Summary of Contents for DTU-G100












Reviews: