HOYLU PEN
STATUS
LED COLOR
Power ON
Connected
Low Battery
Pairing Mode
Tip Error
Illuminating
Dimming/Pulsing
Flashing
Flashing
Flashing
Interactive Pens
The Hoylu collaboration software works in conjunction with the micro-dot pattern screen material and
interactive pens. The dot pattern is 600 dpi and each dot has it’s own coordinates. The pens have a small
sensor in the tip that detects the dot pattern on the screen and printed dot pattern paper. The dot pattern
then tells the pen where it is in relation to the entire screen. The pens then talk to the PC via Bluetooth, so their
interaction is then reflected on the screen.
The pen has two sets of tips to use. The first is the plastic tip used for interaction with the HoyluWall™ screen.
The second is a pen tip used for writing on the printed micro dot pattern paper.
It is very important that you
do not use the pen tips on the HoyluWall™ itself. The marks made may be permanent and could damage the
surface.
For the optimal performance when using the pen
on the HoyluWall™, make sure that the pen camera
(recessed part of the front the pen) is under the
pen tip and you are angling the pen between 50
and 80 degrees to the HoyluWall™ surface.
When using the pen with the printed micro dot
pattern paper, ensure that the paper is laying
flat and not curved, which can cause the pen to
misread the dot pattern.
Do
NOT
use the pen tips on the HoyluWall™. Only use the plastic tips on the HoyluWall™.
9
Summary of Contents for HoyluWall
Page 1: ...WALL INSTALLATION MANUAL...