FAQ
Installation FAQ
Q: I used the pen tips, or other permanent ink, on the HoyluWall™. What is the best way to clean off the
HoyluWall™ screen?
A: In most cases the best thing to use is the white eraser that comes included with your accessories box. If that
does not work, you can use a clean rag or paper towel and an ammonia-free spray cleaner.
Q: I’m not installing any shelving beneath the HoyluWall™ and I’d prefer to have the HoyluWall™ projection
extend to the very edges of the boards (“fitted view”). Are there adjustments to the installation
measurements I should make?
A: This configuration can be accomplished by extending the projectors outward from the wall. Extend until the
projection displays as desired.
Q: Can I mount the HoyluWall™ Wall Cleat or Projector Mounts into a plaster wall?
A: It is recommended that you attach the HoyluWall™ cleat to a stud to guarantee the stability of the screen
over time. For the projector mounts, it is required that at least one half of the mounting bolts are drilled into
a stud. Scan a stud finder device across your wall for best results.
Standard 16:9 Ratio
(Room for pen shelving)
“Fitted” View
Use a stud finder device to scan a wall for studs.
10
Summary of Contents for HoyluWall
Page 1: ...WALL INSTALLATION MANUAL...