hoxter HOS, User Manual

Page: 15 / 68

EN I 15
5. Set-up
5.1 Wireless display and control unit pairing A W U
For pairing wireless display and control unit, follow the instructions bellow (
fig. 6
):
1. Make sure all the components are properly connected to the control unit and that the diodes on its back does not indicate any error.
In case of any error message, solve the error first in order to continue the pairing procedure.
2. Open the battery cover on the back of the wireless display, insert two AAA-sized alkaline batteries (included) and close the battery
cover.
3. The pairing symbol appears on the wireless display:
4. Bring the wireless display closer to the pairing sensor on the back of the control unit (max. 15 cm).
5. Press the
SYS button on the back of the control unit.
6. The start of the pairing process is accompanied by a slight vibration of the wireless display.
7. Successful pairing is confirmed by a short beep.
8. The controller has now been paired with the control unit.
≤ 15 cm
fig. 6 / Pairing the wireless display with the control unit