hoxter ABRA 6, Installation And Operating Instruction, Page: 6 / 16

DOOR SENSOR INSTALLATION
Break out the indicated opening in the steel
hitch
(B) , pull the door sensor through this hole
(A)
and fasten with the distance barrel
(C)
and a nut (D) .
Fasten the steel hitch with the door sensor
on designed place at the frame
(E) .
Enclose the magnetic counterpart on the
bottom edge of the doors.
Both the door sensor and the magnetic
counterpart must be placed in the common
axis. The distance between those parts
must be 2-12mm / 0.08-0.47 in.
(F) In case
the distance between these part is too big,
underlay the magnetic counterpart with the
distance barrel.
The magnetic counterpart is strong enough
to held on place. For the fixation use
enclosed screws
(G)
.
A
B
C
D
E
INSTALLATION
1
2
3
4
5
2-12 mm
F
6
G