20_
LAMONA
Appliances
720mm (Min)
555mm
595mm
715mm
700mm
17mm
600mm
17mm
50mm
A
A
B
C
B
C
x2
x2
x2
Installation and connection
1.
The Oven is designed to fit within a 720 x 600
aperture with a minimum depth of 575mm
2. Align the two brackets ‘B’ with the top edge of
the of the cabinety with the screws provided
(as illustrated below) , set the leading edge of
each bracket 50mm from the front edge of the
furniture.
3.
Folowing this fit the two runners ‘A’ to each
side of the oven housing
4. Brackets ‘C’should be possitioned verticaly
17mm back from front edge of the cabinate
frontals
Note the vertiacl brackets ‘C’ only have the
cabinete side pre drilled. For greater stability the
brackets ‘C’ can be drilled and secured from the
front once the oven is in possistion.
Slide the oven through the cabinet aperture, align
and secure.
Fix your oven with the 2 screws and washers as
indicated in the illustration.
Final check
Connect the appliance to the mains supply,
switch on the mains supply and check the oven’s
functions,
The clock time must be set in order for the
functions to work. Refer to initial use section for
further info.
Installation
