INSTALLATION INSTRUCTIONS
XALE Series
04/12/2018
Doc#1025-000244-000 RV0
Installation Steps
1.
Release arm-door screw (1 screw) to gain access to wiring compartment and pole-side nuts/bolts.
2.
Mount arm to pole with supplied hardware. Ensure that it is tight, secure, and gasket is in place. (requires Metric #14
wrench)
3.
Attach luminaire to the arm using supplied hardware. Transfer fixture wire inside the wiring compartment.
4.
Ensure power is off, and then make electrical connections. Connect wires; white wire to “Neutral”, black wire to “Line”,
green wire to “Ground”.
5.
Check that the lighting fixture is firmly installed and wired correctly.
6.
Close the arm-door.
7.
Finally, turn on power and verify function.
Mounting on round poles:
Use XAL-RPA accessory to mount this fixture on round poles, up to 5” diameter (sold separately)
Additional Product Images
# 1025-000230-050 RV00
100W, 150W Luminaire
230W Luminaire
300W Luminaire
