Set-up Procedure
Plug the Desk into an electrical source. (The Set-up Procedure must be completed after assembly and prior to
normal operation.)
To Move Your Desk Up and Down
To Set Memory Position
(4 Positions Available)
To Move the desk to a Memory Position
Repeat for
more positions
Press and hold the UP (“
^
”) and DOWN (“ v ”) arrows simultaneously. Your desk
will start to move down.
Continue holding the UP and DOWN arrows. When
the desk reaches its lowest position, it will move up slightly, then stop.
Press and hold the UP arrow to raise
the desk.
Press and hold UP or DOWN arrow. Release
arrow when desk reaches desired height.
Press and release the number corresponding to desired Memory Position.
Your desk will move to that position and stop.
Release arrow to stop desk at
desired height.
Press and release “S” and, within 3 seconds, press and release “1”.
Memory Position 1 is now saved.
Release arrows simultaneously.
Set-up is now complete.
Congratulations!
Press and hold the DOWN arrow to
lower the desk.
Repeat Steps 1 & 2 to save Memory
Positions 2, 3 & 4.
Release arrow to stop desk at
desired height.
+
OR
S
S
1
1
+
+
Step 1
Step 1
Step 1
Step 1
Step 2
Step 2
Step 2
Step 3
Step 3
Step 4
SmartMoves Memory Height Keypad
Smart people choose SmartMoves. They also read directions.
Tools Required
A steady hand
5
