Don’t sweat it. Assembly is a day at the beach.
1
Unpack all parts. For protection, keep the white foam
sheet attached to the face of the Desktop during
assembly. Lay Feet and Legs down flat - do not
stand them upright. Place the Desktop face down
on a clean, flat surface.
2
Locate one Leg; place
the Leg Cable under
the Quick Release Bracket.
Position the leg so the tabs
align with the slots in the
Frame. Set the Leg into
the Frame.
3
Push the Leg so it slides out as shown. Push the Quick Release
Lever down to lock the Leg in place.
4
Connect the Cable Extension and the Leg Cable.
Plug the loose end of the Cable Extension into the
Control Box.
Desk Assembly — Top, Base and Memory Height Keypad
Assembly of your SmartMoves desk begins with a single step.
WARNING: Keep small parts and plastic away from children.
Your Desk Assembly will arrive in two boxes. Most Accessories will arrive in additional boxes.
Tools Required
Time Required
Phillips-head
screwdriver
(provided)
Hold on tight,
this is going to
be fast.
Hex key
(provided)
Leg Cable
Leg
Align Tabs with slots in Frame
Frame
Tabs
Quick Release
Bracket
Push Leg
to slide
Quick Release
Lever
Leg Cable
Cable
Extension
Control Box
Back of Desktop
Front of Desktop
Bottom view
of Desktop
1
