background image

1

FLOOR CLOCK SETUP 

and OPERATING INSTRUCTIONS 

CLOCK SETUP INSTRUCTIONS

1.   Move the clock close to its final location for assembly and setup. Make sure the clock is positioned firmly on the floor. 

Levelers are provided on the bottom of the clock (Figure 1). Adjust levelers for maximum stability and proper alignment.

  WARNING:

 ENSURE CLOCK IS POSITIONED SQUARE AND FIRM ON THE FLOOR SO THAT IT WILL NOT FALL OVER. KEEP 

CHILDREN AWAY FROM THE CLOCK.

 

WARNING:

 KEEP PLASTIC BAGS AND SMALL PARTS AWAY FROM CHILDREN

Figure 1

Floor Leveler

Figure 2

Figure 3

2.  Locate the Power Supply (Figure 2) and connect it to the Lamp Cord located at the back of the clock base (Figure 3).

3.  Move the clock to the final location and plug. See page 4 for Safety Strap installation instructions.

4.  Plug the Power Supply into an electrical outlet. Turn the Lamp on by touching the Round Metal Touch Plate on the back of the clock base (figure 4). 

There are four levels of lighting: low, medium, high, and off.

5.  The direction of the light may be adjusted by pushing gently with your finger on the Lamp (figure 5).

Figure 4

Figure 5

Power 

Supply

Lamp

Cord

Power 

Supply 

Cord

Round Metal

Touch Plate

Lamp

Appearance may vary.

Reviews: