3
12. Install the Head Assembly to the back of the dial by placing the flat edge of the Head Assembly over the Metal Bracket and carefully pulling the Head
Assembly down until it rests completely level at the bottom of the Metal Bracket (Figures 9 & 10).
NOTE: Make sure the Head Assembly is secure before installing the Pendulum.
13. Hang the Pendulum by the Pendulum Hook on the Pendulum Guide. (Figure 11 & 12).
14. The Pendulum hook must fit snug on the Pendulum Guide to prevent wobbling and erratic movement. If the Pendulum fails to continue swinging or
wobbles, the Pendulum Hook can be tightened to fit snug to the Pendulum Guide by squeezing the Pendulum Hook with pliers as shown (Figure 12).
NOTE: Make sure the pendulum is secure before operating.
15. Start the Pendulum by moving it to the far left of center and release it to swing. The Pendulum should swing freely.
BATTERY REPLACEMENT
If the clock begins to lose time or the pendulum does not swing, this is a sign of weak or exhausted batteries. Replace with new alkaline batteries.
Head
Assembly
Metal
Bracket
Figure 9
Figure 10
Figure 12
Figure 11
Pendulum Hook
Pendulum
Guide
Pendulum
