32
Chapter 4
D82014014B 10/15
To move the seat forward or backward
1.
Determine the amount the seat needs to be moved.
2.
Remove the controller from the arm (See page 43).
3.
Remove the front bolts and loosen the rear bolts. Slide the seat back
until the slots are cleared and remove the seat.
4.
Locate the four bolts that hold the seat brackets to the base.
5.
Remove the bolts and reposition the brackets by the desired amount.
Align the bracket holes to the frame holes.
6.
Reinstall the seat bracket bolts.
Rear Bolt Front Bolt
Adjusting The Seat Position
Seats with side mounting brackets can be adjusted forward and
rearward and up and down.
To raise or lower the seat
1.
Locate the hex head or socket head bolts on the side brackets
below the seat. Loosen the rear bolts and remove the front bolts
(See Figure 4J, below).
2.
Slide the seat back and reposition the rear bolts in the desired
slots. Line up the front holes and reinstall the front bolts. Tighten
all bolts securely.
Figure 4J - Seats With Side Rail Mounting
Summary of Contents for Teknique HD-6
