3 OF 3
STEP 4:
STEP 6:
* (PARTS INCLUDED WITH KIT)
With battery cover removed, remove fuse from fuse
holder.
Place new batteries over battery cover hold-down strap
Black
Negative
RED
POSITIVE
Fuse
Holder
* Bolt
* Washers
* Nut
* Fuse
Protective
Cap
STEP 7:
Re-install battery wires matching black wire to forward negative terminal
and red wire to forward positive terminal. TIGHTEN ALL HARDWARE
STEP 9:
Re-install battery cover and fasten hold down strap.
STEP 10:
Re-install seat and controller. Be sure to TIGHTEN ALL HARDWARE
How to Install Your
New Batteries
To avoid serious injury or death:
•
ALWAYS turn the power off before and during repair operations.
•
To prevent short circuit, fire or other hazards, prevent contact
between battery terminals and any surface that may cause a
short, spark or other hazard
•
ALWAYS check that all fasteners are secure before driving.
IF YOU NEED ASSISTANCE CALL 1-800-96-HOVER
D84014460 / REV **/ 9/13/13
Pull back protective caps and use 7/16" wrenches to
disconnect wires one at a time from battery terminals.
Remove old batteries.
STEP 5:
STEP 8:
Replace fuse in fuse holder. Re-install fuse holder to rear
terminals. TIGHTEN ALL HARDWARE