Make Sure The wires under the seat are
connected properly.
1. 2 wires attaches to the wheel motors,
make sure the Arrows are aligned
2. The 3rd wire attaches to the battery
The Levers located near motors towards the
back of the chair work as follows.
When the Levers are positioned towards the
inside of the chair, the chair is ready to be
powered.
When the Levers are positioned towards the
outside of the chair, the chair is ready for
manual self propelling.
When you are ready to switch gears, please
make sure that the Joystick controller is
turned off completely.
*Please do not engage levers from Powered to
Manual without the chair being shut off.
JDY Imports
323-522-5817
Page 15
