Hove ONE ver. 1, Manual, Page: 7 / 20

Hove ONE ver. 1 Manual 2021-03-01 Rev. 1.0 6 / 19
•
Screw the adapter (C) onto a full Hove Grease Cartridge (E) with the desired
type of grease. Be sure to screw the adapter sufficiently firm, so the join is
airtight.
o
Make sure the grease is fully advanced in the adaptor
•
Mount the four support pins(I) for the cartridge.
•
Install the grease cartridge with adapter on the machine.
o
On models with cartridge turn on coupling:
Lock the adapter by turning the lock lever fully clockwise.
o
On models with cartridge push on coupling:
Push on the cartridge
•
Position Flush valve (K) to “Flush”
•
Plug the power cord in the machine’s power socket and plug it into the mains
outlet supply.
•
The machine is ready when the MAIN screen appears at control panel (G).
•
Start the pump in manual dosing mode and pump out 300 grams of grease to
flush the pump.
•
Stop the pump after flushing.
•
Position Flush Valve to “Pump”
•
Lubricate
Daily use
•
Observe the safety and operating instructions on the machine and the used
lubricants.
•
Always flush the pump with the new type of grease in the event of a changing
the grease type.
•
If you use the same hose for all types of grease, make sure to flush the hose
before use.
After use
•
Unplug the power cord from the mains outlet supply and disconnect it from
the machine.
•
Clean the Hove ONE to prevent any contamination of grease or pump.
•
Demount and dispose of empty Hove grease cartridges in an environmentally
safe manner according to current regulations of the country where the
machine is used.
•
Dismount the four support pins for the grease cartridge.
•
Close the Hove ONE. Make sure that the lid is closed correctly.