Hove ONE ver. 1 Manual 2021-03-01 Rev. 1.0 15 / 19
Once a year, check the pump as to correct measuring (check that the density factor is
set correctly in the display for the lubricant used for control). Pump a certain amount
and check the weight. If the weight is not correct, we recommend you to contact Hove
A/S to have the flow meter checked.
In the event of damage to the machine
Warning
Unless agreed otherwise, only HOVE A/S may carry out repairs and alterations to the
machine.
Worn or defective parts must be replaced by original spare parts. Incorrect repairs or
use of non-original spare parts can lead to serious damage to the machine and danger
to the user.
If the machine is visibly damaged (cracks, holes, etc.) the machine should no longer be
used, but must be repaired or discarded.
What to do if an error occurs?
You can often remedy errors to the machine without submission for repair. The
following table shows the possible causes of errors and tips to remedy them.
Summary of Contents for ONE ver. 1
Page 1: ...Hove ONE ver 1 Manual...