5
1.4
Regulations, official approvals
For installation and operation of the system, the following
regulations are to be observed:
Germany
•
DIN EN 12831 Heating systems in buildings – proce
-
dure for calculating the standard heating load.
•
DIN EN 12828 Heating systems in buildings - planning
of hot water systems.
•
DIN EN 13384 Exhaust gas systems – thermal and fluid
dynamic calculation methods.
•
DIN 4755 Oil-fired systems: design, construction and
technical safety requirements.
•
DIN 4756 Gas-fired systems: design, construction and
technical safety requirements, planning and execution
(for operation with gas burners).
•
DIN 18160 House chimneys, requirements, planning
and execution.
•
PED (Pressure Equipment Directive).
•
TRD 721 Safety equipment to safeguard against ex
-
cess pressures / safety valves / for group II steam boil
-
ers.
•
VDI 2035 Prevention of damage by corrosion and the
formation of scale in hot water systems.
•
DIN 57 116 / VDI 0116 Electrical equipment for firing
systems (VDE regulation).
Austria
•
ÖNorm (Austrian standard) B 8130 Open hot water sys
-
tems, safety installations.
•
ÖNorm B 8131 Closed-circuit hot water systems, safe
-
ty, construction and testing regulations.
•
ÖNorm B 8133 Water heating systems, technical safety
requirements.
•
ÖNorm B 8136 Heating systems, space requirements
and other building requirements.
•
ÖNorm EN 12831 Heating installations in buildings –
procedure for calculating the standard heating load.
•
ÖNorm EN 12828 Heating systems in buildings: plan
-
ning of hot water heating systems.
•
ÖNorm EN 13384 Exhaust gas systems – procedure
for heat and technical gasflow calculations.
•
ÖNorm M 7515 Calculation of chimney dimensions;
definition of expressions, calculation procedures.
•
ÖNorm H 5171 Heating systems – technical building
requirements.
•
ÖVGW TR gas.
Switzerland
•
VKF-Association of Cantonal Fire Insurers.
•
Regulations of the fire police.
•
SN (Swiss standard) EN 12831 Heating installations in
buildings – procedure for calculating the standard heat
-
ing load.
•
SN EN 12828 Heating systems in buildings - planning
of hot water heating systems.
•
SN EN 13384 Exhaust gas systems - procedure for
heat and technical gasflow calculations.
•
SVGW Swiss Gas and Water Federation.
•
SNV 27 10 20 Aeration and ventilation of the boiler room.
•
SWKI 97-1 Water treatment for heating, steam and air-
conditioning plant.
•
SWKI 80-2 Technical safety regulations for heating in
-
stallations.
•
KRW Corrosion caused by halides.
•
KRW/VSO/FKR Electrical connections on heating boil
-
ers and burners ready to plug in.
•
Technical tank regulations TTV 1990.
and further prescriptions and standards published by
CEN, CEN ELEC, DIN, VDE, DVGW, TRD and the leg
-
islature.
In a similar manner, the regulations of the local building
authorities, insurers and chimney inspectors must be tak
-
en into account. When gas is used as fuel, the regulations
of the responsible gasworks must be observed and an
official authorisation may also be required.
1.5
Guarantee
Trouble-free functionality is only guaranteed when both
these and the operating instructions are meticulously ob
-
served and the boiler is regularly serviced by a qualified
engineer (maintenance contract). Repair of faults and
damage caused by contaminated operating materials
(gas, water, combustion air), unsuitable chemical addi
-
tives in the heating water, careless treatment, faulty in
-
stallation, unauthorised modifications and damage as a
result of force are not subject to our guarantee liability;
this applies also to corrosion caused by halides, e.g. em
-
anating from spray canisters, paints and varnishes, adhe
-
sives, solvents and cleaning agents.
4 213 787 / 01
IMpORTAnT InSTRUCTIOnS
Summary of Contents for UltraOil 65
Page 43: ...43 4 213 787 01...
