5
4 213 893 / 01
IMPORTANT INFORMATION
1.4
Regulations, official approvals
The following regulations are to be complied with for
installation and operation, in addition to the recognised
rules of the art:
Germany
• DIN EN 12831 Heating systems in buildings
- Methods for calculating the design heat load
• DIN EN 13384 Flue gas systems
- Heat and flow calculation methods
• DIN EN 12828 Heating systems in buildings
- Planning of hot water heating systems.
• VDI 2035 Prevention of damage through corrosion
and scale formation in hot water heating systems.
• Firing regulation for the Federal regions
• DVGW-TRGI 86-96
• Technical regulations of gas supply enterprises
• VDE 0100 for electrical installations and the TAB
(technical connection conditions of
the responsible energy supplier)
• ATV data sheet M251
• Accident prevention regulations
- VBG 1 General regulations
- VBG 4 Electric systems and equipment
Austria
• OENORM 12831 Heating systems in buildings
- Methods for calculating the design heat load
• OENORM 13384 Flue gas systems
- Heat and flow calculation methods
• OENORM 12828 Heating systems in buildings
- Planning of hot water heating systems.
• OENORM H5152 Gas condensation
for furnace installations
• OENORM H5195-1 Prevention of damage
through corrosion
•
M 7443, (Part 2,3,7) Gas appliances
with atmospheric burners
•
M 7446, Heat output appliances for gaseous fuels
•
M 7457, Heat output appliances with
mechanically supported premix batwing burners
•
M 7444, Special gas boilers with burners without fan
•
M 7459, Gas appliances with
gas-air compound controller
• ÖVGW TR- Gas (Austrian Gas and
Water Confederation - Technical Guidelines)
• Technical provisions of the gas suppliers
Switzerland
• SN EN 12831 Heating systems in buildings
- Methods for calculating the design heat load
• SN EN 13384 Flue gas systems
- Heat and flow calculation methods
• SN EN 12828 Heating systems in buildings
- Planning of hot water heating systems.
• Requirements of the VKF
Cantonal Fire Insurance Association
• Fire service regulations
•
SVGW directives, gas guiding standard G1
• SNV271020 Aeration and ventilation
of the boiler installation room
•
SWKI 88-4 Water treatment for heating,
steam and air conditioning systems
• SWKI 80-2 Technical safety regulations
for heating systems
• KRW Corrosion through halogen compounds
• Procal/FKR Plug-in electrical connections
on heating boiler and burner
• Technical tank regulations TTV 1990
• EKAS - Guideline for liquid gas part 2
and further regulations and standards prescribed by the
CEN, CEN ELEC, DIN, VDE, DVGW, TRD and by law.
The regulations of the local building authorities, insur
-
ance companies and chimney inspectors must also be
taken into account. The regulations of the responsible
gas supply company are also to be complied with and
any necessary official approval obtained if using gas.
Regulations governing the discharge and
treat ment of condensate are subject to the
spe cifications of the local water authorities
and may deviate from waste water guideline
ATVM251. Please contact your water author-
ity for details of the applicable local regula-
tions.
1.5
Transport and storage
Please remove the packing materials and examine the
consignment for correctness, completeness and possible
transport damage.
The appliance is only to be transported and stored only in
its original packing. Interim storage of Hoval gas boilers is
only to take place in weather protected rooms and only in
the original packing. The ambient conditions for storage
must be within the following limits:
- Air temperature:
-10 °C - +50 °C
- Air humidity:
50 - 85 % relative humidity
- no condensation
Summary of Contents for TopGas 35
Page 35: ...35 4 213 893 01 ...
