4 216 974 / 02
7
Subject to modifications
4
Operator terminal BG02 E
5
TopTronic
®
E room control module comfort
plus
6
Target value max. air humidity
7
Air quantity in %
6 Commissioning
6.1
Installation inspection
Please check the following points:
• The HomeVent
®
comfort ventilation unit must be
mounted securely and vibration-free on the wall,
ceiling or floor.
With ceiling installation:
Beware of falling parts.
• The HomeVent
®
comfort ventilation unit must be
mounted securely and vibration-free on the wall or
the original Hoval device base.
•
One silencer each must be fitted for supply and
extract air. A silencer may also be necessary in the
fresh and exhaust air, depending on the positioning
of the outlets. When using one of the three acoustic
insulating boxes, all supply and exhaust air lines are
insulated.
• The comfort ventilation unit must be connected in
accordance with the rules of ventilation engineering.
• Fresh and extract air lines must be thermally
insulated to prevent vapour diffusion.
• If the comfort ventilation unit is located in an
unheated room, the supply and extract air lines
must thermally insulated.
• The ducts must be leak-tight.
• Check the supply air outlets for dirt build-up and
clean them if necessary.
• Extract air points must be free and clean.
• The fresh air intake must be clean and
unobstructed.
•
The filters must be clean.
• The HomeVent
®
comfort ventilation unit must be
connected to the mains.
• Electrical connecting lines must be intact.
• The comfort ventilation unit must be inspected and
serviced regularly. The cleaning and maintenance
intervals depend to a great extent on the running
time and the degree of contamination in the ambient
air (e.g. dust, traffic etc.).
• The HomeVent
®
operator terminal must be
connected to the comfort ventilation unit.
6.2
Switching on
• Connect the mains plug of the HomeVent
®
comfort
ventilation unit to the device and in the socket.
• Set the operator terminal to the desired operating
mode.
7 Maintenance
The comfort ventilation unit must be inspected and ser-
viced regularly. The cleaning and maintenance intervals
depend to a great extent on the running time and the
degree of contamination in the ambient air (e.g. dust,
traffic etc.).
i
Thorough cleaning of the HomeVent
®
Comfort ventilation unit by Hoval Cus-
tomer Service or an installer trained by
Hoval.
i
Conclude a service agreement with Ho-
val, and your HomeVent
®
comfort ven-
tilation unit will be serviced regularly by
Hoval Customer Service.
7.1
Supply air an extract air filter
Caution:
Do not operate the comfort ventilation unit
unless the filters are fitted!
i
Replace the filters after the pollen season
if you have a pollen allergy.
Filter message on operator terminal:
In order to ensure optimal operation,
filters must be replaced when a filter mes
-
sage appears on the operator terminal.
The interval depends on the filter load.
7.1.1 Filter soiling
The supply air and extract air filters are time-monitored.
The end of the set operating time is displayed on the
operator terminal. The filter replacement interval can be
adapted to local conditions.
• Operator terminal BG02 E:
Operating mode display LED lights up orange.
• TopTronic E
®
room control module comfort plus:
operating mode display LED lights up orange and is
supplemented by a warning triangle on the display.
COMMISSIONING AND MAINTENANCE
