Hoval CombiVal WP-VT Operating Instructions Manual Download Page 3

3

4 209 973 / 00

Safety instructions

Dear Hoval customer,

In the Hoval water heater / heat 
pump you have purchased a product 
that is built to the highest possible 
quality standards using state of the 
art technology.
• Please check the items delivered, 

to ensure that they are complete 
and match your order. Inspect 
for any transport damage that 
may have occurred, if necessary 
re-porting it to your Installer or 
nearest Customer Service Centre. 
Complaints made later cannot be 
accepted due to insurance ar-
rangements. 

•  For a correct installation, pay at-

tention to laws currently in force, 
plus any regulations and stan-
dards, in particular regulations laid 
down by the relevant utility compa-
ny. In case of queries, please con-
sult your installer or your nearest 
Hoval Customer Ser-vice Centre. 

•  Before start-up, the installation 

must be inspected and released 
for use by the installer.

•  To ensure safe, economical and 

trouble free operation, only use 
your Hoval heat pump in accor-
dance with these operating instruc-
tions.

•  The heat pump may only be used 

for those purposes for which it is 
built, and for which it has been ap-
proved by Hoval.

•  Do not make any modifications to 

the equipment, as this will result in 
invalidating all legal claims. Con-
version kits must be installed by, 
and obtained from, the licensed 
installer or Hoval Customer Ser-
vices.

• 

In the event of damage or mal-
function, find out about the repairs 
required from Hoval Customer 
Services. To prevent any damage, 
it is essential that the equipment 
be turned off.

With the purchase of a Hoval prod-
uct you also have the protection of a 
comprehensive warranty, in accord-
ance with our terms of sales and 
warranty.

With proper use, the ownership of 
your Hoval water heater/ heat pump 
will be a pleasure, and above all 
will provide you with a reliable and 
economical source of hot water.

Safety Instructions  

Installation and service work on heat 
pumps be dangerous, on account of 
high  pressures, live parts and the 
location of the installation. 

Heat pumps may only be installed, 
put into operation or maintained by 
trained, qualified service staff.  

When working on this equipment, 
attention must be paid to all safety 
instructions in the relevant docu-
ments, on stickers or plates on the 
equipment itself and all other safety 
precautions in force.   

 Caution

  Before carrying out maintenance  
  and service work, always  pull the  
  equipment’s plug out of the mains.

Summary of Contents for CombiVal WP-VT











Reviews: