9
3. Walk across the detection area approximately 5 metres from the unit. As
you walk across the detection 'zone' the lamp will illuminate. Now stand
still until the lamp extinguishes (this should take approximately 5 seconds).
SENSOR DETECTION RANGE
NOTE: If the fitting is mounted higher than 2.4m, aiming the sensor down will
reduce coverage distance. The detector is less sensitive to motion directly
towards it (see
Figure 3
below)
40º
180º
1
FIGURE 2
FIGURE 3
nd up and down. Adjust the sensor
re 1
&
2
) for the sensor patterns.
e bottom of the sensor, (see
Figure
ns:
, 5 mins & 12 mins
e as well as night, illuminating the
me. This allows testing to be carried
sensor.
p will immediately illuminate as the
After approximately 1 to 2 minutes,
n outside the detection area during
20 & 40W sensor lights instructions_A6_Oct18.qxp_Layout 1 7/11/18 9:19 am Page 9
